- What is the difference between a 10.9 and 12.9 Bolt?
- Is a 10.9 Bolt stronger than Grade 8?
- How much force can a m8 bolt hold?
- What does 10.9 hardness of nut & bolt mean?
- How much weight can a 10.9 bolt hold?
- What is the highest grade of bolt?
- How strong is a grade 8.8 bolt?
- How much weight can a Grade 5 bolt hold?
- How can you tell if a bolt is Grade 5?
- How can you tell if a bolt is high tensile?
- What grade is a 10.9 bolt?
- What is the hardest bolt you can buy?
- What is the difference between 8.8 and 12.9 grade bolts?
- Are higher grade bolts more brittle?
- Is there a grade 10 bolt?
- What does Bolt grade 12.9 mean?
- Are stainless bolts stronger than Grade 8?
- Are Grade 8 bolts hardened?
- How strong is a grade 12.9 bolt?
- How much force can a bolt take?
- What grade bolt has the highest shear strength?
What is the difference between a 10.9 and 12.9 Bolt?
12.9 grade steel has 120% of the tensile strength of 10.9 grade steel.
The “12” prefix indicates a tensile strength of X100 N/mm^2 and the “9” suffix indicates a multiplier.
Both 12.9 and 10.9 have the same multiplier, so the comparison is straightforward: 12 to 10..
Is a 10.9 Bolt stronger than Grade 8?
Class 10.9 is stronger than class 8.8. It is commonly found in high strength automotive applications. Class 10.9 is similar to grade 8. A low carbon steel for general use.
How much force can a m8 bolt hold?
Stripper bolt material: 4137 33～38 HRC, strength class 10.9.） From the table at right, for a strength class of 10.9 and a maximum allowable load of 200 kgf, the suitable bolt is a 318［kgf］M8. Therefore we select a 10 mm MSB10 with a M8 thread section.
What does 10.9 hardness of nut & bolt mean?
Grade 10.9 metric bolts are manufactured using medium carbon steel, medium carbon steel alloy and low carbon boron steel that has been quenched and tempered. Used in automotive applications and for bolting large and forged parts, metric 10.9 bolts exhibit high tensile strength and good wear resistance.
How much weight can a 10.9 bolt hold?
From the table at right, for a strength class of 10.9 and a maximum allowable load of 200 kgf, the suitable bolt is a 318［kgf］M8. Therefore we select a 10 mm MSB10 with a M8 thread section.
What is the highest grade of bolt?
grade 8The strongest commercial-quality bolt is grade 8, marked by six raised dashes; its medium-carbon alloy steel has been quenched and tempered to achieve a tensile strength of 150,000 psi.
How strong is a grade 8.8 bolt?
Mechanical propertiesGrade, material & conditionNominal thread diameter size range [mm]Tensile strength (min) [MPa]Class 5.8 Low or medium carbon steel; cold worked5–24520Class 8.8 Medium carbon steel; quench and temperedUnder 16 (inc.)80017–72830Class 8.8 low carbon Low carbon boron steel; quench and tempered9 more rows
How much weight can a Grade 5 bolt hold?
Proof LoadNom Bolt Size (in)Grade255/16290044503/8425066007/165850905012 more rows
How can you tell if a bolt is Grade 5?
Grade 5 bolts are case hardened, meaning the bolt has been heated enough to hardened the outside of the bolt but not enough to harden the inside portion. Grade 5 bolts are identified by 3 evenly spaced radial lines on the head.
How can you tell if a bolt is high tensile?
To identify this grade, look out for an ‘8.8’ stamp or a set of three radial lines on the head of the bolt. Most often, customers looking for a high tensile bolt may just be looking for the 8.8 grade.
What grade is a 10.9 bolt?
Table 1.Grade/ClassStrengthMetric Class 4Similar to Grade 2.Metric Class 8.8Similar to Grade 5.Metric Class 10.9Similar to Grade 8.Metric Class 12.9The highest metric class for strength, it exceeds Grade 8.10 more rows
What is the hardest bolt you can buy?
BUMAX® Ultra has proven itself as the world’s strongest bolt – in various highly-demanding critical fastener applications around the world where standard fasteners are simply inadequate.
What is the difference between 8.8 and 12.9 grade bolts?
The mechanical difference between the 12.9 and 8.8 is yield strength (roughly 90% of 1200 MPa vs 80% of 800 MPa). That means the 12.9 can be stretched further (i.e. torqued to some higher value) before it yields, which of course increases the clamp force.
Are higher grade bolts more brittle?
One common misconception about bolts is that a higher rated bolt is stronger, yet more brittle, and therefore lower grades should be used in places like in suspension systems so they can deform rather then break. This is wrong! There are two types of forces a bolt experiences, tension and shear.
Is there a grade 10 bolt?
Class 10. This is a metric nut grading similar to the SAE grade 8 classification, which is used in conjunction with Class 10.9 bolts. This strength of nut is used in automotive, and structural industries, as well as in high temp applications.
What does Bolt grade 12.9 mean?
Grade 12.9 Bolt is a high tensile bolt that has a diameter of 12.9 mm and the lengths vary from 20mm to 200mm based on the application requirement. … There are studs, hex bolts, U bolts, T bolts and many other types in this grade.
Are stainless bolts stronger than Grade 8?
Stainless steel bolts are rated for corrosion resistance. Bolt strength is rated in PSI (pounds per square inch). A stainless steel bolt has the same PSI rating as a grade 5 bolt (125,000 PSI). A grade 8 bolt has a stronger rating with a PSI of 150,000.
Are Grade 8 bolts hardened?
Grade 8 bolts have been hardened more than grade 5 bolts. Thus they are stronger and are used in demanding applications such as automotive suspensions. Grade 8 bolts have 6 evenly spaced radial lines on the head.
How strong is a grade 12.9 bolt?
The minimum ultimate tensile strength of the Grade 12.9 Metric Hex Head Bolts is about 1242 Mpa or 180,000 PSI, making them the highest grade of bolts produced.In fact, the Grade 12.9 Nuts is known for their high tensile strength.
How much force can a bolt take?
Steel bolts are graded according to newtons per millimeter squared for bolt tensile strength as compared to yield strength. For example, a steel bolt with a rating of 5.5 will provide roughly 500 newtons/mm2 of bolt tensile strength and approximately 400 newtons/mm2 of yield strength.
What grade bolt has the highest shear strength?
They are commonly used at high stress points in connecting devices.12.9 Bolts. A 12.9 bolt is one of the highest grade of bolts produced. … 12.9 Shear Strength. The minimum tensile strength of a 12.9 bolt is 1220 MPa.